The general principle for selecting a shell-and-tube heat exchanger is as follows: When operating at high temperatures and pressures with large throughput, strength and structural reliability are crucial, and a shell-and-tube heat exchanger should be selected. If the operating temperature and pressure are not high, and the throughput is not large, plate or plate-fin heat exchangers can be selected. These types of heat exchangers have significant advantages such as high heat transfer efficiency, compact structure, and low metal content. Additionally, for highly corrosive media, heat exchangers made of corrosion-resistant materials should be selected, such as titanium metal heat exchangers or polytetrafluoroethylene (PTFE) heat exchangers.
In practical applications, shell-and-tube heat exchangers are more commonly used, but they can be further divided into metal shell-and-tube heat exchangers and fluoroplastic shell-and-tube heat exchangers, with slightly different operating conditions.
Metal shell-and-tube heat exchangers: Higher pressure resistance, lower corrosion resistance, can be cleaned later, suitable for higher temperature ranges.
Fluoroplastic shell-and-tube heat exchangers: Lower pressure resistance, excellent corrosion resistance, less prone to scaling and therefore do not require cleaning, only suitable for temperatures below 240℃.
Classification of shell-and-tube heat exchangers: Industrial heat exchangers are generally classified according to the following aspects: structure, heat transfer process, compactness of heat transfer surfaces, materials used, flow pattern, flow path, fluid phase, and heat transfer mechanism. The following is an introduction to the relevant classifications of shell-and-tube heat exchangers.
1. Classification by materials used: Generally, heat exchangers can be divided into two categories: metallic materials and non-metallic materials. Non-metallic heat exchangers mainly include ceramic heat exchangers, plastic heat exchangers, graphite heat exchangers, and glass heat exchangers.
2. Classification by heat transfer surface characteristics: Based on the shape of the heat transfer tube surface inside the shell-and-tube heat exchanger, it can be classified into threaded tube heat exchangers, corrugated tube heat exchangers, shaped tube heat exchangers, surface porous tube heat exchangers, spiral flat tube heat exchangers, spiral grooved tube heat exchangers, annular grooved tube heat exchangers, longitudinal grooved tube heat exchangers, finned tube heat exchangers, spiral wound tube heat exchangers, finned tube heat exchangers, internal insert heat exchangers, serrated tube heat exchangers, etc.
3. Classification by fluid flow pattern: Based on the fluid flow pattern inside the shell-and-tube heat exchanger, it can be classified into three types: parallel flow, counter-flow, and cross-flow. Among these three flow patterns, counter-flow has the lowest thermal stress on the heat exchanger wall and the largest temperature difference between the fluids on both sides of the wall under the same conditions, making it the preferred choice. 4. Classification by structural characteristics: It can be divided into fixed tube sheet type, floating head type, U-tube type, stuffing box type, sliding tube sheet type, double tube sheet type, thin tube sheet type, etc. If the design pressure of the low-pressure side of the heat exchanger is less than 2/3 of the design pressure of the high-pressure side, this accident condition should be considered, and the fluid on the high-pressure side should be required to flow through the tube side.
