Drill holes between the concave and trapezoidal grooves and thread or weld multiple evenly distributed bolts. The floating head flange is a double-seal design with both convex and trapezoidal bosses. The partition plate is a wide-face flange connected to the trapezoidal boss and located on the same end face. The convex and trapezoidal bosses and the partition plate correspond to the concave and trapezoidal grooves and the partition grooves on the floating head tube sheet, respectively. This floating head flange is assembled and welded with a flangeless spherical head to form a floating head cover. The flange bolt holes mate with the threaded holes or bolts on the floating head tube sheet, secured with bolts. Alternatively, the nut can be tightened to press the concave and trapezoidal grooves and the branch grooves of the floating head tube plate and its gaskets. If necessary, the thickness and diameter of the floating head tube plate and the inner diameter of the cylinder can be appropriately increased, and the dimensions of related components can be changed and increased accordingly. An auxiliary steel ring without external force is also configured, the inner diameter of which is larger than the outer diameter of the floating head tube plate. One end of the steel ring is connected and sealed to the concave or trapezoidal sealing surface of the inner side flange of the outer head cover by a flange, and the other end is sealed to the original concave groove of the floating head tube plate and its gaskets or outer circle by a flange or other structure.
Floating Head Heat Exchanger Structure
May 08, 2026
Leave a message
Send Inquiry
