Shell and Tube Heat Exchanger Tube Bundle Assembly

This Shell and Tube Heat Exchanger Tube Bundle Assembly is the core heat exchange component of shell and tube heat exchangers. Adopting high precision tube expansion and welding technology, it features high thermal efficiency, corrosion resistance and easy installation. It is an ideal replacement spare part for heat exchanger maintenance and upgrade.
Send Inquiry
Description

Shell and Tube Heat Exchanger Tube Bundle Assembly  Tube Bundle Assembly
 

Product Overview

 

 

 

Our Tube Bundle Assembly is the core heat-transfer internal component for shell-and-tube heat exchangers, assembled with heat-exchange tubes, forged tube sheets, segmental baffles, tie rods and support tubes. As pressure-vessel certified manufacturer, we support two delivery modes: fast-track single replacement-bundle supply for plant turnaround maintenance, and bulk EPC spare-part package contracting including reverse-engineering from old-unit drawings, thermal-performance upgrade, fabrication, full inspection and project-site technical coordination

We deliver tailor-made bundle solutions (direct-replacement or performance-upgraded) instead of generic spare parts. Every bundle uses traceable raw materials, precision tube-expansion plus orbital welding, manufactured under international pressure-vessel codes. PMI verification, hydro-pressure and air-tightness leak tests are fully performed before shipment, ensuring dimensional interchangeability and stable heat-transfer output for chemical, petrochemical, power, pharma and environmental-protection facilities.

 

22.1(001)

 

22.2(001)

Product Description

 

 

 

Generic tube bundles often fail in ways that only show up after installation. Tube-to-tubesheet joints with inconsistent welding or expansion quality, plus tolerance deviations, cause poor interchangeability, hidden micro-leaks, and performance that drops off within a short run - which means unplanned shutdown losses. Our precision-manufactured bundles are built to avoid these specific failures.

Tube-to-tubesheet joints are made with combined high-precision expansion and orbital welding, which removes the cross-leakage path between tube-side and shell-side media. Baffle spacing is set to keep turbulence strong enough to hold the original heat transfer efficiency, or improve it. Each finished bundle is hydro-pressure tested and pneumatically checked for tightness. It is a drop-in replacement for aged, fouled, or corroded original bundles, so thermal capacity is restored without production loss.

We can customize tube material grade, tube diameter, length and pitch, baffle type and spacing, and bundle type (fixed-tubesheet, floating-head, or U-tube). If you only have an old sample or drawing, we can reverse-engineer from that. Matched gaskets and auxiliary spare parts are supplied to your equipment datasheet.

Our service covers reverse-engineering support, thermal performance evaluation, technical proposal, 2D fabrication drawings, manufacturing, third-party witness inspection support, export-grade packaging, installation guidance, and long-term spare-parts supply. For long-cycle EPC plant-maintenance projects, our engineering team joins early tender discussions and iterates drawings over multiple rounds.

 

Basic Product Parameters

 

 

Item Specification

Structural Type

Fixed tube-sheet, floating-head, U-tube bundle assembly

Tube Material

Carbon steel, SS304 / SS316L, titanium; duplex/nickel-alloy customizable for corrosive service

Tube Sheet

Forged tube-sheet, material customizable

Applicable Medium

Water, steam, mineral oil, chemical corrosive fluid
Customization Scope Tube diameter, tube length, tube pitch, baffle structure, bundle type; reverse-engineering available from customer drawings / samples

 

 Core Advantages & Competitor Comparison

 

Item Generic Bundle Our Tube Bundle
Tube-to-tubesheet Joint Manual weld, poor expansion, leak risk Orbital weld + precision expansion, leak tested
Interchangeability Loose tolerance, on-site rework Tight tolerance, drop-in fit
Heat Transfer Misaligned baffles, quick performance decay Optimized baffles, stable thermal efficiency
Maintenance Frequent failures & shutdowns Reliable, less downtime
5-year TCO Low initial cost, high running loss 14–21% lower lifecycle cost
Service Bare bundle only Engineering + site support + spare part framework

 

 

Shell and Tube Heat Exchanger Tube Bundle Assembly

 

 

22.3(001)

Why our solution performs better

 

 

 

1. Strict joint-process control: standardized orbital welding + roller expansion procedure to avoid common weld-defect issues such as lack-of-fusion or porosity.

2. Full material traceability: every batch with MTC material certificates, PMI inspection to prevent mixed-material risk.

3. Flexible business mode: fast delivery for single turnaround-spare-part; dedicated project team for large-volume long-term EPC spare-part packages.

4. Complete inspection documentation to satisfy international-project audit requirements.

 

 

Packaging and Transportation

Tube-bundles are derusted, tube openings sealed with dust-proof plugs, wrapped in waterproof and shock-resistant foam and secured in export-grade wooden frames to avoid bending, collision and contamination in transit. We arrange tracked heavy-cargo delivery, and deliver EPC support including reverse-engineering, bidding documents, phased spare-part delivery, third-party inspection and long-term spare-parts framework agreements, alongside 24h remote technical support, installation guidance, manufacturing-defect warranty and professional maintenance advice.

Applications

Our precision-manufactured tube bundles suit exchanger overhaul and replacement work, from single-unit turnarounds to full-plant EPC maintenance packages. Typical uses include shell-and-tube bundle renewal in petrochemical and chemical plants, heat exchanger internals replacement in power plants, sanitary-grade bundle refurbishment for food and pharmaceutical lines, spare internals for exchangers in corrosive environmental-protection service, and other cases where a drop-in bundle replacement or a thermal performance upgrade is needed.

22.4(001)
 
Why Choose Us
 
01/

Factory-Direct, Dual-Mode Supply – Certified pressure-vessel manufacturer (not a trader). Handles both urgent single spare parts and large EPC packages, with reverse-engineering & upgrade solutions.

02/

Reverse-Engineering Expertise – Reproduce bundles from old drawings, field data, or samples; optimize baffle/tube layout for better heat transfer without changing shell dimensions.

03/

Strict QC & Full Certification – PMI, welding inspection, hydro/air leak tests on every bundle. Complete MTC, dimensional reports, and test dossiers for international acceptance.

04/

Solving Core Pain Points – Fix joint micro-leakage, interchangeability issues, efficiency decay, and shutdown losses. Precision manufacturing cuts long-term risk and OPEX.

05/

Full-Cycle Service – Fast quotes for single parts; dedicated project manager for long-cycle EPC projects, from inquiry to after-sales.

06/

Global Project Experience – Proven tube-bundle supply for petrochemical, power, and chemical projects worldwide, with export-grade packaging and heavy-cargo logistics.

 

 

modular-1
CTA

Need high-quality interchangeable tube bundle parts? Contact us to customize standard and non-standard heat exchanger tube bundles to upgrade your heat exchange system.

 

FAQ

 

 

Q: What is the function of the tube bundle assembly? 

A: As the core component of the shell and tube heat exchanger, it completes heat conduction between cold and hot media. It supports fluid turbulence to ensure continuous and efficient heat exchange inside the equipment.

Q: What types of tube bundles can you produce? 

A: We produce fixed tube sheet type, floating head type and U-tube type bundles. It covers most tubular heat exchanger models for industrial heat exchange conditions.

Q: Why does the old tube bundle need to be replaced? 

A: Long-term operation will cause scaling, corrosion, tube wall thinning and heat transfer efficiency reduction. Timely replacement of the tube bundle can restore cooling and heating capacity and avoid equipment shutdown losses.

Q: Is the size universal for replacement? 

A: Yes. We strictly follow GB, ASME and other international standards. The size, pipe diameter and hole spacing are highly interchangeable, which is convenient for direct on-site replacement.

Hot Tags: shell and tube heat exchanger tube bundle assembly, China shell and tube heat exchanger tube bundle assembly manufacturers, suppliers, factory, Floating Head Assembly, Floating Head Assembly for Heat Exchanger, Heat Exchanger Baffle, Heat Exchanger Flange, Heat Exchanger Tube Sheet, Heat Exchanger Tube Sheet Plate

Send Inquiry

Send Inquiry