Air Cooler

This industrial air cooler uses ambient air for forced heat dissipation without cooling water. It features energy saving, low operating cost and easy maintenance. It is an ideal cooling equipment for high-temperature fluid in chemical, petroleum and power industries.
Send Inquiry
Description

Air Cooler  Air Cooling Heat Exchanger
 

Product Overview

 

 

 

Our industrial air cooler is water-free forced-convection cooling equipment built on high-frequency welded finned-tube bundles. As a pressure-vessel certified manufacturer, we handle fast-delivery single-unit supply for plant retrofits as well as full-scope bulk EPC contracting, covering thermal simulation, custom engineering design, fabrication, full-range inspection, and on-site technical coordination for water-short industrial sites.

We provide tailored cooling solutions rather than standard hardware alone. Every unit uses traceable raw materials and an optimized fin-tube welding process, and is manufactured under international pressure-vessel codes. Strict PMI, NDE, hydro-pressure, and tightness tests are completed before shipment, ensuring stable outdoor continuous operation in petrochemical, power, metallurgy, and mining facilities.

 

air cooled heat exchanger

 

air cooled heat exchanger2

Product Description

 

 

 

Generic air coolers tend to fail where it matters: fin-to-tube bonding weakens, fins loosen under thermal cycling, fans vibrate out of balance, and seals leak. Performance drops off within a short outdoor run, and shutdowns become frequent.

Our air cooler is built around those failure points. High-frequency welded finned tubes give a larger effective heat dissipation area, and low-noise axial fans drive forced convection without cooling water. The unit comprises the finned-tube bundle, fan assemblies, a heavy-duty support frame, and air deflectors. Tube boxes use high-strength flange sealing to prevent medium leakage, and every pressure-bearing component is hydro-pressure and air-tightness tested. Because no cooling water is required, the unit fits water-scarce sites.

Customization covers tube and fin material grade, total cooling area, fan power and quantity, anti-corrosion finish, horizontal or vertical layout, and auxiliary accessories, based on your process datasheet.

We handle thermal calculation, technical proposals, 2D/3D drawings, manufacturing, third-party witness inspection, export-grade packaging, installation guidance, and spare-parts supply. On long-cycle large-scale EPC projects, our engineers join early bidding discussions and work through several rounds of scheme iteration.

 

Basic Product Parameters

 

 

Item Specification
Structural Type Horizontal / Vertical forced-air cooling layout
Tube Material Carbon steel, SS304 / SS316L, copper tube
Fin Material Aluminum alloy, stainless-steel fin (customizable)
Applicable Medium Hot oil, steam, industrial circulating water, general chemical fluid
Customization Cooling area, fan power & quantity, anti-corrosion grade, overall dimension and auxiliary accessories
 
 
Core Advantages
 
Item Generic Air Cooler Our Air Cooler
Fin-Tube Joint Wrapped fins, easy loosening, rising thermal resistance High-frequency welded fins, stable heat transfer
Mechanical Reliability Unbalanced fan, flimsy frame, high vibration/noise Precision fan, reinforced frame, low vibration
Power Consumption Poor fan matching, high power draw Water-free cooling, energy-saving fan
Maintenance Frequent overhaul from loose fins Welded structure, low failure rate
5-year TCO Low initial cost, high running cost No cooling water system cost; 13–22% lower lifecycle cost (water-short areas)
Service Equipment only Thermal simulation, site support & spare part supply

 

Air Cooler
 

 

 

air cooled heat exchanger3png

Why our solution performs better

 

1. High-frequency welded fin-tube technology: avoid fin-loosening failure common for cheap mechanically-wrapped fin products.

2. Full-scope factory testing: fan dynamic balance test, pressure test and full-unit running inspection before delivery.

3. Flexible business mode: fast-track single-unit delivery for retrofit orders; dedicated project team for large long-duration industrial projects.

4. Complete quality documentation satisfying international-project audit requirements.

 

 

Packaging and Transportation

Finned-tube bundles are wrapped by anti-collision plastic film to prevent fin deformation; fan-motors receive waterproof sealing; overall frame secured with steel structures. Large-size units are segmented for transport to avoid vibration damage. We arrange tracked heavy-cargo delivery, and deliver EPC support including thermal calculation, bidding documents, phased delivery, third-party inspection and long-term spare-parts agreements, alongside 24h remote support, commissioning guidance, manufacturing-defect warranty and professional maintenance advice.

Applications

This unit is built for plants where cooling water or cooling towers are not available, using water-free forced-draft cooling instead. It serves small retrofits and full-plant EPC projects. Duties range from high-temperature process fluids in petrochemical and chemical plants to auxiliary-loop media in power and energy systems, hot-working media in metallurgy, and circulating media in machinery. Other heavy-duty sites without water-based cooling are also covered.

air cooled heat exchanger4

 

modular-1
CTA

Looking for water-saving and low-consumption cooling equipment? Contact us to customize industrial air coolers to reduce your long-term production operating costs.

 

FAQ

 

 

Q: What is the working principle of an air cooler? 

A: The high-temperature fluid flows inside the finned tubes, and the axial flow fan forces ambient air to sweep the tube surface. Heat is exchanged through convection to rapidly cool down the internal medium without cooling water.

Q: What media can the air cooler cool? 

A: It is suitable for cooling hot oil, steam, industrial circulating water and general chemical liquid. It is widely used for high-temperature medium cooling in various industrial production lines.

Q: What is the difference between air cooling and water cooling? 

A: Air cooler uses natural air for heat dissipation with zero water consumption and low later cost; water cooler relies on cooling circulating water with high water and electricity consumption. Air coolers are more suitable for water-deficient areas.

 

Hot Tags: air cooler, China air cooler manufacturers, suppliers, factory, Air Cooled Condenser, air cooled heat exchangers, Air Cooler, Air Cooling Heat Exchanger, Tubular Air Cooled Condenser

Send Inquiry

Send Inquiry